Robofun 機器人論壇

標題: Arduino Uno R3的5V輸出電流 [打印本頁]

作者: iiaann81    時間: 2017-6-23 11:44
標題: Arduino Uno R3的5V輸出電流
如題,Arduino Uno R3的5V輸出電流是多少呢?

以下是官網針對電源供應作出的說明:

5V. This pin outputs a regulated 5V from the regulator on the board.
The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V).
Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board. We don't advise it.

3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 50 mA.

這樣的話5V輸出的電流是取決於甚麼呢???

有最大上限嗎??

謝謝
作者: superme55557    時間: 2017-6-23 18:09
當然是你負載的需求啊 V=IR




歡迎光臨 Robofun 機器人論壇 (https://robofun.net/forum/) Powered by Discuz! X3.2