|
雖然一年後才回覆此主題,希望依舊能幫助到有需要的人
p.s.有問題請留言給我
#include <LiquidCrystal.h>
#include <Keypad.h>
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
// 3x4 Keypad
const byte ROWS = 4; // 4 Rows
const byte COLS = 3; // 3 Columns
// 定義 Keypad 的按鍵
char keys[ROWS][COLS] = {
{'1','2','3'},
{'4','5','6'},
{'7','8','9'},
{'*','0','#'}
};
// 定義 Keypad 連到 Arduino 的接腳
byte rowPins[ROWS] = {32, 22, 24, 28}; // 連到 Keypad 的 4 個 Rows: Row0, Row1, Row2, Row3
byte colPins[COLS] = {30, 34, 26}; // 連到 Keypad 的 3 個 Columns: Column0, Column1, Column2
// 建立 Keypad 物件
Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );
void setup() {
Serial.begin(9600);
// set up the LCD's number of columns and rows:
lcd.begin(16, 2);
}
void loop() {
// 讀取 Keypad 的輸入
char key = keypad.getKey();
// NO_KEY 代表沒有按鍵被按下
if (key != NO_KEY){
// 假如有按鍵被按下,就印出按鍵對應的字元
Serial.println(key);
lcd.print(key);
}
} |
|