Robofun 機器人論壇

標題: He3D-tricolor2 3D printer kit reprap bigger size [打印本頁]

作者: he3d    時間: 2014-10-7 15:26
標題: He3D-tricolor2 3D printer kit reprap bigger size
本帖最後由 he3d 於 2014-10-7 15:27 編輯

Products Description:
if  you want to buy the whole machine,we can assemble it for you.but you need add 300usd,In addition,we will send you 3 material supports,and 1kg ABS filament for free.

Printing size is about:250x230x140mm

external dimension:470*450*400mm

Nozzle quantity: three pieces(nozzle diameter:0.4mm  if you need 0.5mm,please left message for us)

Off-line printing: support (master board can carry TF card)

Control master board: Melzi (two pieces) master and slave board

Printing material: ABS, PLA, 1.75mm

Nozzle temperature:0-260°

Computer interface: USB

Precision standard: 0.1-0.4 mm

Resolution: 0.0125 mm

Construction speed: 1800 mm/min

Move speed: 12000 mm/minute

Deposition rate: 33 cm3/hour Movement: X and Y and Z axis is linear bearing.

Power: Input AC110-230V, Output DC 24v 400w

Package weight: 10kg (wood packaging box)

Size after packaging: 530*230*290mm


Characteristics of fantastic three colors』 printing 3D print:

1.  support three different material to print, for example PLA, ABS, PVA(realize special support material to print, PVA)

2. three different colors』 material

3. change different diameter nozzle, to realize different thickness of layor printing, big nozzle satisfy inner filling, small one satisfy out printing

4. 5 mm thickness aluminum alloy surface temperature, durable heat up faster

5. during print lower sound

6. support component printing, to reduce the edge warping phenomenon the kit parcel


----------------------------------------------------------------------------------------------------------------------------------------------------------

It is recommended that at the same time buy:


3 pcs ++3 pcs


-----------------------------------------------------------------------------





Customers Who Bought This Product Also Purchased...

















歡迎光臨 Robofun 機器人論壇 (https://robofun.net/forum/) Powered by Discuz! X3.2